720World

Little Trucks, Big World

datzenmike's Discussions (2,704)

Discussions Replied To (2657) Replies Latest Activity

"Idle has it's own circuit separate from everything. If it won't idle the problem is…"

datzenmike replied Jun 7 to Bogging/sputtering past 3k RPM

5 Jun 7
Reply by Brandon

"Clogged cat?  Set valve lash? Ignition wires/cap/rotor? "

datzenmike replied Jun 5 to Bogging/sputtering past 3k RPM

5 Jun 7
Reply by Brandon

"The slave should move about 1.18". If moving about an inch the hydraulics are good e…"

datzenmike replied Jun 4 to Transmission woes

5 Jun 4
Reply by datzenmike

"The E has 'hydraulic lifters', well hydraulic cushioning of the rocker arms would be…"

datzenmike replied Mar 5 to Finally ka24e power

11 Apr 7
Reply by channing

"D-21 Hardbody and 720 (beside being trucks) are similar in steering and oil pan plac…"

datzenmike replied Feb 24 to ka24e swap

3 Feb 24
Reply by Cody

"What ever you run, run the same diameter. You can run wider on the backs than the fr…"

datzenmike replied Feb 24 to Stock Wheel and Tire for 4WD?

3 Feb 24
Reply by datzenmike

"The Z24 crank won't drop into the Z22 block without cutting down the counterweights…"

datzenmike replied Jan 17 to Gone far too long....

5 Jan 17
Reply by datzenmike

"Hey Patrick good to hear from you.  In the last 4-5 years I gave my 620 away but pul…"

datzenmike replied Jan 15 to Gone far too long....

5 Jan 17
Reply by datzenmike

"Or just bend around a baseball bat or can of peas. Find the length of old line by us…"

datzenmike replied Jan 12 to Brake Lines Source

2 Jan 12
Reply by datzenmike

"Factory service manual '84 720) Full....... 10 ohms but I imagine no resistance wil…"

datzenmike replied Jan 12 to Factory fuel sending unit resistance range, gauge install questions.

5 Jan 16
Reply by mazspd6

RSS

Badge

Loading…

Events

© 2017   Created by TigerRacing.   Powered by

Badges  |  Report an Issue  |  Terms of Service