720World will be shutting down at the end of 2020.  Please see the announcement in the Forums.  No new members are being accepted at this time.  Thanks for all the support over the years, and happy trails.

720World

Little Trucks, Big World

Can anyone tell me the cold valve settings on a Z24.  I have a rebuilt head and need to set the valves cold and than reset hot. Thanks for any help. 

Views: 65

Reply to This

Replies to This Discussion

I do   to  spec 0.12in but what  I do leave  tight alitthe   but   you  need  to  re  adjust it  warm to  quite   those  valves is  a better way . I did  that  way on my truck.

Thanks...

Set to TDC compression on #1and wiggle rocker arms 1, 2, 4, 6... turn ONE turn and wiggle 3, 5, 7, 8. As long as all the rockers will wiggle and are not tight... good enough to start er up.

Thanks for the reply! 

RSS

© 2020   Created by TigerRacing.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service